Photo: ZLEA · Licence: CC BY-SA 4.0 · View the original source and licence terms.
DJI / DRONE PROFILE
DJI Matrice 210 Review: Enterprise Drone with Flexible Payload Mounting
Explore the available technical information for this aircraft, including camera capabilities, flight performance and manufacturer-specific specifications.
The DJI Matrice 210 (M210) is an enterprise multirotor designed for industrial inspection and specialist aerial work. It is related to the M200 but offers more flexible payload mounting, including supported upward/downward and dual-downward gimbal configurations. It is not the same aircraft as the M210 RTK.
Payload mounting and configuration
The M210 supports compatible DJI gimbals such as Zenmuse X4S, X5S, Z30, XT and XT2. Its mounting configuration can be selected for the mission, but payload compatibility and aircraft performance depend on whether a single gimbal or dual downward gimbals are installed. The aircraft’s payload limit also changes with the battery type.
Battery, weight and endurance
DJI lists approximate weights of 3.84kg with two TB50 batteries and 4.57kg with two TB55 batteries. Maximum takeoff weight is 6.14kg. The listed payload is approximately 2.3kg with TB50 batteries or 1.57kg with TB55 batteries. Maximum flight time without payload is 27 minutes with TB50 and 38 minutes with TB55; DJI lists 13 and 24 minutes respectively with full payload.
DJI Matrice 210 specifications
| Specification | M210 |
|---|---|
| Battery system | 2 × TB50 or 2 × TB55 |
| Weight with TB50 pair | Approx. 3.84kg |
| Weight with TB55 pair | Approx. 4.57kg |
| Maximum takeoff weight | 6.14kg |
| Payload with TB50 pair | Approx. 2.3kg |
| Payload with TB55 pair | Approx. 1.57kg |
| Max flight time, no payload | 27min (TB50); 38min (TB55) |
| Max flight time, full payload | 13min (TB50); 24min (TB55) |
| Maximum ascent / descent | 5m/s / 3m/s |
| Maximum wind resistance | 12m/s |
| Service ceiling | 3,000m |
| Ingress protection | IP43 (manufacturer rating) |
M210 vs M210 RTK
The M210 uses the standard positioning configuration. The M210 RTK adds RTK positioning capability and has different aircraft dimensions, weight and payload figures. If centimetre-level positioning is part of the mission specification, read the separate Matrice 200 Series family guide and verify correction-service availability before choosing a model.
Verdict
The M210 is most relevant to enterprise teams that need flexible camera mounting and can support a dual-battery aircraft. Its value depends on the payload configuration, battery condition and availability of compatible components. Check the aircraft manual and exact gimbal mounting arrangement before purchasing used equipment.
Official source
Specifications are based on DJI’s official Matrice 200 Series specifications and M210/M210 RTK user manual. This is a specification-based review, not a claim of hands-on testing.
Who should consider DJI Matrice 210 Review: Enterprise Drone with Flexible Payload Mounting?
This model should be evaluated as part of an enterprise workflow rather than by aircraft specifications alone. Start with the deliverable: visual inspection, thermal survey, mapping, public safety, asset documentation or remote operations. Define required image resolution, measurement confidence, coordinate reference system, data format, repeatability, turnaround and acceptance criteria. A sensor feature is valuable only if the organisation can use and interpret its output correctly. For DJI Matrice 210 Review: Enterprise Drone with Flexible Payload Mounting, request written confirmation for the exact aircraft, payload, mount, firmware and software combination.
Limitations and trade-offs to understand
Thermal imagery does not automatically provide a certified temperature measurement. Results depend on emissivity, reflected temperature, distance, angle, atmospheric conditions, focus, calibration and operator interpretation. For mapping, RTK does not remove the need for sound flight planning, overlap, control strategy and quality assurance. Confirm the required accuracy using a representative project. For DJI Matrice 210 Review: Enterprise Drone with Flexible Payload Mounting, validate representative mission data against the organisation’s accuracy and reporting requirements before fleet purchase.
Alternatives worth comparing
Compare the model with the DJI Matrice 4E for mapping-oriented work, Matrice 4T or 5T for thermal missions, Matrice 4D/4TD for dock-based workflows, and the Matrice 350 RTK or Matrice 400 for larger enterprise payload needs. These platforms have different payload and operating ecosystems; verify the exact model variant and compatibility. For DJI Matrice 210 Review: Enterprise Drone with Flexible Payload Mounting, include service turnaround, spare batteries, training and data governance in the procurement comparison.
Pre-purchase and ownership checklist
Ask for a payload compatibility matrix, current user manual, firmware support statement, service-level commitment, battery replacement cost, cybersecurity documentation and a representative sample data set. Include operator training, insurance, maintenance, spare parts and software in the total-cost calculation. For DJI Matrice 210 Review: Enterprise Drone with Flexible Payload Mounting, test the failsafe and communications-loss procedure at the intended operating site.
How to use this specification profile
This page is a research-based reference, not a claim that IGIDRONE has independently flight-tested the aircraft. Treat manufacturer maximums as test-condition figures and distinguish standard equipment from optional accessories or regional bundles. Before buying, compare the exact model code, firmware, battery, controller and payload configuration against the current official manual. If a field is marked unknown or is not documented by the manufacturer, do not infer a value from a similarly named variant. For DJI Matrice 210 Review: Enterprise Drone with Flexible Payload Mounting, request written confirmation for the exact aircraft, payload, mount, firmware and software combination.
Primary manufacturer reference: Open the manufacturer specification or support page. Confirm the current regional documentation before purchase. For DJI Matrice 210 Review: Enterprise Drone with Flexible Payload Mounting, validate representative mission data against the organisation’s accuracy and reporting requirements before fleet purchase.
Editorial update: 8 November 2026. Model availability, prices, software support and regional operating rules can change. Confirm them with the manufacturer, authorised distributor and relevant aviation authority before purchase or flight. For DJI Matrice 210 Review: Enterprise Drone with Flexible Payload Mounting, include service turnaround, spare batteries, training and data governance in the procurement comparison.
Mission validation before fleet purchase
Run a proof-of-concept on a representative asset or survey site. Define the expected output in advance and have the end user assess the imagery or data, not only the pilot. For inspection, confirm that the camera can resolve the smallest feature the team must identify. For mapping, validate the processing workflow and coordinate system against known control points. For DJI Matrice 210 Review: Enterprise Drone with Flexible Payload Mounting, request written confirmation for the exact aircraft, payload, mount, firmware and software combination.
Evidence to request from a supplier
Ask for current manuals, payload compatibility statements, sample data, firmware lifecycle information, repair turnaround, training requirements and cybersecurity documentation. If the supplier quotes mapping accuracy or thermal measurement performance, ask for the test conditions and method used to validate it. Obtain written confirmation of any payload or software dependency that is essential to the mission. For DJI Matrice 210 Review: Enterprise Drone with Flexible Payload Mounting, validate representative mission data against the organisation’s accuracy and reporting requirements before fleet purchase.
Editorial standard: buyer guidance is based on published manufacturer information and practical ownership considerations. IGIDRONE does not claim independent flight testing unless a page explicitly documents a real test. For DJI Matrice 210 Review: Enterprise Drone with Flexible Payload Mounting, include service turnaround, spare batteries, training and data governance in the procurement comparison.
Drone Specifications
| Brand | DJI |
|---|---|
| Camera | Payload-dependent; supports compatible Zenmuse X4S, X5S, Z30, XT and XT2 |
| Maximum Video Resolution | Payload-dependent; not a single aircraft-wide recording resolution. DJI lists Zenmuse X4S, X5S, XT, XT2 and Z30 among compatible payloads. Confirmed examples: Zenmuse X4S records C4K (4096 × 2160) and 4K (3840 × 2160) up to 59.94 fps; Zenmuse XT2 visual camera records 4K UHD (3840 × 2160) at 29.97 fps. FPV/live-view resolution is not used as recorded-video resolution. |
| Maximum Flight Time (minutes) | 27 min no payload with TB50; 38 min no payload with TB55; 13 min full payload with TB50; 24 min full payload with TB55 (DJI test conditions) minutes |
| Maximum Transmission Range (km) | Matrice 210 remote-controller transmission distance (unobstructed): 2.4 GHz: 7 km FCC, 3.5 km CE, 4 km SRRC; 5.8 GHz: 7 km FCC, 2 km CE, 5 km SRRC. km |
| Weight (g) | Approx. 3.84 kg with two TB50 batteries; approx. 4.57 kg with two TB55 batteries (Matrice 210 configuration) g |
| Wind Resistance (m/s) | 12 m/s m/s |
| Obstacle Sensing | DJI Matrice 210: forward vision system obstacle sensing 0.7–30 m; upward infrared sensing 0–5 m; downward vision positioning and ultrasonic sensing. Performance depends on lighting and surface conditions. |
| Positioning / GPS | GPS / GLONASS; RTK on M210 RTK variant only |
| Maximum Speed (m/s) | 82.8 km/h with single upward/downward gimbal; 64.8 km/h with dual downward gimbals; P/A modes configuration-dependent m/s |
Additional Notes
This is the standard Matrice 210, not M210 RTK. M210 RTK uses different battery-dependent flight-time figures (23/32 min no payload). Standard M210 maximum payload is approx. 2.3 kg with TB50 pair or 1.57 kg with TB55 pair.
Specification source: Official source
Last verified: 2026-11-08
Official Price (USD)
No public USD price was verified on the manufacturer’s official store during this check.
For enterprise or discontinued models, contact the manufacturer for a current quotation. We do not substitute third-party seller prices.
Price checked: 2026-11-07
MODEL TECHNICAL RECORD
Detailed Technical Specifications
Manufacturer-specific technical information recorded for this model. Values not present in the source record are not estimated.
Aircraft
| Weight with two TB50 batteries | Approx. 3.84 kg |
|---|---|
| Weight with two TB55 batteries | Approx. 4.57 kg |
| Maximum takeoff weight | 6.14 kg |
| Maximum payload with TB50 pair | Approx. 2.3 kg |
| Maximum payload with TB55 pair | Approx. 1.57 kg |
| Maximum flight time no payload | 27 min TB50; 38 min TB55 |
| Maximum flight time full payload | 13 min TB50; 24 min TB55 |
| Maximum speed with single upward/downward gimbal | 82.8 km/h S/A; 61.2 km/h P |
| Maximum speed with dual downward gimbals | 64.8 km/h S; 61.2 km/h P/A |
| Maximum ascent/descent speed | 5 m/s ascent; 3 m/s descent |
| Wind resistance | 12 m/s |
| Service ceiling | 3,000 m |
| IP rating | IP43 |
| Operating temperature | -20°C to 45°C |
Payloads
| Supported gimbals | Zenmuse X4S, X5S, Z30, XT, XT2; compatible third-party payloads |
|---|---|
| Gimbal configurations | Single downward, dual downward, single upward |
Sensing
| Forward vision | 0.7–30 m obstacle sensing |
|---|---|
| Downward vision | Vision positioning up to 10 m; ultrasonic 0.1–5 m |
| Upward infrared | 0–5 m obstacle sensing |
Battery
| TB50-M200 | 4,280 mAh, 22.8 V, 97.58 Wh |
|---|---|
| TB55 | 7,660 mAh, 22.8 V, 176.93 Wh |
Aircraft & Flight
| Maximum horizontal speed | 82.8 km/h (single upward/downward gimbal configuration); configuration-dependent |
|---|---|
| Maximum takeoff weight | 6.14 kg |
Navigation & Obstacle Sensing
| Supported GNSS systems | GPS and GLONASS; RTK variant adds RTK positioning |
|---|
Operating Conditions & Dimensions
| Maximum wind resistance | 12 m/s |
|---|
MANUFACTURER DATA
Detailed official specifications
Technical figures below are transcribed from the manufacturer documentation linked with this profile. Test figures are maximum or controlled-condition ratings where stated; actual performance varies by configuration and operating conditions. A field is omitted when the cited source does not publish a reliable value.
Manufacturer source last checked: 2026-11-08
Evidence type: Official DJI manufacturer specifications / enterprise support documentation
Aircraft
| Model | M210 RTK |
|---|---|
| Package Dimensions | 31.1 × 15.4 × 11.4inch (790 × 390 × 290mm) |
| Dimensions (unfolded) | 34.9 × 34.6 × 16.1 inch (Unfolded, 887 × 880 × 408 mm), |
| Dimensions (folded) | 28.2 × 11.3 × 9.3 inch (Folded, 716 × 287 × 236 mm) |
| Folding Method | Folded Inward |
| Diagonal Wheelbase | 25.3 inch (643 mm) |
| Number of Batteries | 2 |
| Weight (TB50) | Approx. 4.42 kg |
| Weight (TB55) | Approx. 5.15 kg |
| Maximum takeoff weight | 6.14 kg |
| Max Payload (2 TB50) | Approx.1.72 kg (with two standard batteries ) |
| Max Payload (2 TB55) | Approx.0.99 kg (with two optional batteries) |
| Hovering Accuracy (P-mode with GPS) | Vertical: ±1.64 feet (0.5 m) or ±0.33 feet (0.1 m, Downward Vision System enabled) or ±0.33 feet (0.1 m, RTK enabled); Horizontal: ±4.92 feet (1.5 m) or ±0.98 feet (0.3 m, Downward Vision System enabled) or ±0.33 feet (0.1 m, RTK enabled) |
| Max Angular Velocity | Pitch: 300°/s, Yaw: 150°/s |
| Max Pitch Angle | P Mode: 30°（Forward Vision System enabled: 25°）； A Mode: 35°；S Mode: 35° |
| Maximum ascent speed | 16.4 ft/s (5 m/s) |
| Maximum descent speed | Vertical: 9.8 ft/s (3 m/s) |
| Max Speed | S Mode: 51.4mph (82.8kph); P Mode: 38mph (61.2kph) ; A Mode: 51.4mph (82.8kph) |
| Maximum service ceiling above sea level | 1.86 miles (3000 m) |
| Maximum wind resistance | 39.4 ft/s (12 m/s) |
| Max Flight Time(No Payload, with TB50) | 23min |
| Max Flight Time(No Payload, with TB55) | 32min |
| Max Flight Time(Full Payload, with TB50) | 13min |
| Max Flight Time(Full Payload, with TB55) | 24min |
| Motor Model | DJI 3515 |
| Propeller Model | 1760S |
| Operating temperature range | -4° to 113° F (-20° to 45°C) |
| IP Rating | IP43 |
| Hovering Accuracy (during safe flights) | Vertical: ±0.5，Downward Vision System enabled: ±0.1; Horizontal: ±1.5，Downward Vision System enabled: ±0.3 |
| Max Pitch Angle (Dual Downward Gimbals) | P Mode: 25°（Forward Vision System enabled: 25°）； A Mode: 25°；S Mode: 30° |
| Max Pitch Angle(Single Upward/Downward Gimbal) | P Mode: 30°（Forward Vision System enabled: 25°）； A Mode: 30°；S Mode: 35° |
| Max Speed(Dual Downward Gimbals) | S Mode: 40.3mph (64.8kph); P Mode: 38mph (61.2kph) ; A Mode: 38mph (61.2kph) |
| Max Speed (Single Upward/Downward Gimbals) | S Mode: 51.4mph (82.8kph); P Mode: 38mph (61.2kph) ; A Mode: 51.4mph(82.8kph) |
| Max Pitch Angle(Dual Downward Gimbals) | P Mode: 25°（Forward Vision System enabled: 25°）； A Mode: 25°；S Mode: 30° |
| Max Speed (Dual Downward Gimbals) | S Mode: 40.3mph (64.8kph); P Mode: 38mph (61.2kph) ; A Mode: 38mph (61.2kph) |
| Max Speed (Single Upward/Downward Gimbal) | S Mode: 51.4mph (82.8kph); P Mode: 38mph (61.2kph) ; A Mode: 51.4mph(82.8kph) |
Gimbal
| Compatible Gimbals | Zenmuse X4S; Zenmuse X5S; Zenmuse Z30; Zenmuse XT; Zenmuse XT2; SLANTRANGE 3PX; Sentera AGX710 |
|---|
Gimbal Installation
| Downward Gimbal Mount | Supported |
|---|---|
| Upward Gimbal Mount | Supported |
| Downward Dual Gimbal | Supported |
Remote Controller
| Model | GL6D10A |
|---|---|
| Operating Frequency | 2.400-2.483 GHz ; 5.725-5.850 GHz |
| Max Transmitting Distance(unobstructed, free of interference) | 2.4 GHz: 4.3 miles (7 km, FCC); 2.2 miles (3.5 km, CE); 2.5 miles (4 km, SRRC) ; 5.8 GHz: 4.3 miles (7 km, FCC); 1.2 miles (2 km, CE); 3.1 miles (5 km, SRRC) |
| EIRP | 2.4 GHz: 26 dBm (FCC); 17 dBm (CE); 20 dBm (SRRC) ; 5.8 GHz: 28 dBm (FCC); 14 dBm (CE); 20 dBm (SRRC) |
| Video Output Ports | USB, HDMI |
| Power Supply | Built-in battery |
| Charging | DJI charger |
| Dual User Capability | Host-and-Slave connection |
| Mobile Device Holder | Tablet or Smart Phone |
| Max Mobile Device Width | 170 mm |
| Output Power | 9 W (Without supplying power to smart device) |
| Operating temperature range | -4° to 104° F (-20° to 40°C) |
| Storage Temperature | Less than 3 months: -4° to 113° F (-20° to 45°C) ; More than 3 months: 72° to 82° F (22° to 28°C) |
| Charging Temperature | 32° to 104° F (0° to 40°C) |
| Battery | 6000mAh 2S LiPo |
| USB Supply Power | iOS: 1 A @ 5.2 V (Max); Android: 1.5 A @ 5.2 V (Max) |
Battery (Standard)
| Model | TB50 |
|---|---|
| Capacity | 4280 mAh |
| Voltage | 22.8V |
| Battery Type | LiPo 6S |
| Energy | 97.58 Wh |
| Net Weight | Approx. 520g |
| Operating temperature range | -4° to 113° F (-20° to 45°C) |
| Storage Temperature | Less than 3 months: -4° to 113° F (-20° to 45°C) ; More than 3 months: 72° to 82° F (22° to 28°C) |
| Charging Temperature | 41° to 104° F (5° to 40°C) |
| Max Charging Power | 180 W |
Battery (Optional)
| Model | TB55 |
|---|---|
| Capacity | 7660 mAh |
| Voltage | 22.8V |
| Battery Type | LiPo 6S |
| Energy | 174.6Wh |
| Net Weight | Approx. 885g |
| Operating temperature range | -4° to 113° F (-20° to 45°C) |
| Storage Temperature | Less than 3 months: -20°C to 45°C ; More than 3 months: 22°C to 28°C |
| Charging Temperature | 41° to 104° F (5° to 40°C) |
| Max Charging Power | 174.6 W |
Charger
| Model | IN2C180 |
|---|---|
| Voltage | 26.1 V |
| Rated Power | 180 W |
DJI GO 4 APP
| Name | DJI GO 4 |
|---|---|
| Mobile Device System Requirements | iOS 9.0 or later,Android 4.4.0 or later |
| Supported Mobile Devices | iOS:iPhone 5s, iPhone SE, iPhone 6, iPhone 6 Plus, iPhone 6s, iPhone 6s Plus, iPhone 7, iPhone 7 Plus, iPad Air, iPad Air Wi-Fi + Cellular, iPad mini 2, iPad mini 2 Wi-Fi + Cellular, iPad Air 2, iPad Air 2 Wi-Fi + Cellular, iPad mini 3, iPad mini 3 Wi-Fi + Cellular, iPad mini 4 and iPad mini 4 Wi-Fi + Cellular. This app is optimized for iPhone 7, iPhone 7 Plus. Android:Samsung tabs 705c, Samsung S6, Samsung S5, Samsung NOTE4, Samsung NOTE3, Google Nexus 6p, Nexus 9, Google Nexus 7 II, Ascend Mate7, Huawei P8 Max, Huawei Mate 8, LG V20, Nubia Z7 mini, Sony Xperia Z3, MI 3, MI PAD, Smartisan T1.; ; *Support for additional devices available as testing and development continues. |
Forward Vision System
| Obstacle Sensing Range | 0.7 - 30 m； |
|---|---|
| FOV | Horizontal 60°，Vertical 54° |
| Operating Environment | Surfaces with clear patterns and adequate lighting (> 15 lux) |
Upward Infrared Sensor
| Obstacle Sensing Range | 0-16.4 feet (0-5 m) |
|---|---|
| FOV | ±5° |
| Operating Environment | Large-sized object with diffuse reflecting surface or high reflective rate (>10%） |
Downward Vision System
| Velocity Range | <32.8 ft/s (10 m/s) at height of 6.56 feet (2 m) |
|---|---|
| Altitude Range | <32.8 feet (10 m) |
| Operating Range | <32.8 feet (10 m) |
| Operating Environment | Surfaces with clear patterns and adequate lighting (> 15 lux) |
| Ultrasonic Sensor Operating Range | 0.33-16.4 feet (10-500 cm) |
| Ultrasonic Sensor Operating Environment | Non-absorbing material, rigid surface (thick indoor carpeting will reduce performance) |
| Surfaces with clear patterns and adequate lighting (> 15 lux) | 0.33-16.4 feet (10-500 cm) |
Gimbals
| Compatible Gimbals | Zenmuse X4S; Zenmuse X5S; Zenmuse Z30; Zenmuse XT; Zenmuse XT2; SLANTRANGE 3PX; Sentera AGX710 |
|---|
Battery
| Model | TB55 |
|---|---|
| Capacity | 7660 mAh |
| Voltage | 22.8V |
| Battery Type | LiPo 6S |
| Energy | 176.93Wh |
| Net Weight | 885g |
| Operating temperature range | -20°C to 45°C |
| Storage Temperature | Less than 3 months: -20°C to 45°C ; More than 3 months: 22°C to 28°C |
| Charging Temperature | 41° to 104° F (5° to 40°C) |
| Max Charging Power | 180 W |
Cendence
| Type | GL800A |
|---|---|
| Operating Frequency | 2.400-2.483 GHz; 5.725-5.825 GHz |
| Max Transmitting Distance (unobstructed, free of interference) | 2.4 GHz: 4.3 miles (7 km, FCC); 2.2 miles (3.5 km, CE); 2.5 miles (4 km, SRRC); 5.8 GHz: 4.3 miles (7 km, FCC); 1.2 miles (2 km, CE); 3.1 miles (5 km, SRRC) |
| EIRP | 2.4 GHz: 26 dBm (FCC); 17 dBm (CE); 20 dBm (SRRC); 5.8 GHz: 28 dBm (FCC); 14 dBm (CE); 20 dBm (SRRC) |
| Power Supply | Extended Intelligent Battery (Model: WB37-4920mAh-7.6V) |
| Intelligent Battery | 4923 mAh LiPo |
| Charging | DJI charger |
| Output Power | 20 W (supplying power to DJI CS550 monitor); 12 W (without supplying power to monitor) |
| Video Output Ports | USB, HDMI, SDI |
| USB Supply Power | iOS: 1 A, 5.2 V (Max); Android: 1.5 A, 5.2 V (Max) |
| Dual User Capability | Master-and-Slave connection |
| Operating temperature range | -4 ° to 104 °F (-20 ° to 40 °C) |
| Storage Temperature | Less than 3 months: -4 ° to 113 °F (-20 °to 45 °C); More than 3 months: 72 °to 82 °F (22 °to 28 °C) |
| Charging Temperature | 32 ° to 104 °F (0 °to 40 °C) |
| Charging Time | About 2 hours and 24 minutes (using a 180 W charger) |
| Supply Power Time | About 4 hours (only Master remote controller function enabled and without supplying power to monitor) |
| Weight | 1041 g |
Source: manufacturer technical specifications and official support documentation. Regional versions, payloads, batteries, firmware and test conditions can change the stated figures. Check the linked source for the applicable configuration.
Related Dji drones
Explore other published models from the same manufacturer.
